RTX 5060 Ti Hashrate Prediction, Is It Worth Mining On?

Summary

In a recent episode, Son of a Tech discusses the predicted hashrate and power consumption for the upcoming RTX 5060 Ti graphics card, focusing on whether it is worth considering for mining purposes. The card is confirmed to have a 180-watt TDP, with two variants offering 16GB and 8GB of memory. Despite having the same bus width and no additional memory bandwidth performance boost, the predicted hash rate for Ergo using the 5060 Ti is 152 MH/s at around 80 watts, potentially dropping to 60 watts with optimization. However, even at this rate and cost, mining profits are minimal, earning approximately 19 cents a day. Despite these modest returns, son of a Tech offers some optimism for better efficiency and encourages feedback on these predictions.

Highlights

• RTX 5060 Ti confirmed with 180-watt TDP and two variants; 16GB and 8GB! 🎮
• The card offers no significant memory bandwidth boost but could still be a power-efficient choice! 💡
• Predicted Ergo hash rate is about 152 MH/s with power usage around 80 watts! ⚙️
• Even with low power usage, earning potential is modest at around 19 cents per day! 💸
• Possible to achieve as low as 60 watts with optimizations for better energy efficiency! 🌟
• Son of a Tech asks for feedback and continued discussions on these predictions! 🗣️

Key Takeaways

• The RTX 5060 Ti is confirmed to have a 180-watt TDP, with both 16GB and 8GB variants 📊
• Hashrate prediction for Ergo mining on the 5060 Ti is around 152 MH/s at 80 watts ⚡️
• Mining profits currently remain low, with an estimated daily revenue of 19 cents 💰
• Potential for further optimization could reduce power consumption to around 60 watts 🚀
• Son of a Tech invites feedback on these mining predictions and further discusses the card’s specs 🎤

Overview

Son of a Tech has provided some interesting updates on the highly-anticipated RTX 5060 Ti, particularly for those in the mining community. The card is set to run with a 180-watt TDP, boasting two versions with 16GB and 8GB options. Despite lacking any impressive memory bandwidth increments, its differentiation comes with its potential for low power consumption.

The card might not offer significant leaps in memory bandwidth, yet it’s whispered to maintain a decent hashrate for those pursuing Ergo mining. Estimated figures pose the card at achieving about 152 MH/s while consuming just about 80 watts of power, a promising efficiency on the energy front. Even though its current profitability stats seem underwhelming at merely 19 cents daily revenue, there is hope that through optimizations, the card can operate at even lower wattages hovering around 60 watts.

Son of a Tech remains optimistic about the card's potential and reminds audiences that tuning and optimizations could yield more favorable results. Viewers are encouraged to share thoughts and engage in discussions on these predictions as they follow along the evolving story of the RTX 5060 Ti in the mining space.

Chapters

• 00:00 - 00:30: Introduction and Specifications The chapter provides confirmed specifications for the RTX 5060 TI, highlighting its 180 watt power consumption. Notably, there will be two variants: one with 16GB and another with 8GB. Interestingly, the bus width remains unchanged, and there is no increase in total memory bandwidth performance according to the available information.
• 00:30 - 02:00: Bandwidth and Hashrate Calculation The chapter discusses the specifications and calculations related to bandwidth and hashrate. It mentions that both boards have GDDR7 memory clocked at 28 Gbps and a 128-bit bus, resulting in a total bandwidth of 448 GB/s. Additionally, the speaker refers to a hashrate chart to provide precise numbers.
• 02:00 - 04:00: Power Consumption and Efficiency The chapter titled 'Power Consumption and Efficiency' discusses the performance metrics of various technological equipment, with a focus on efficiency and power usage. The specific example given involves calculating the power consumption of an automated system ('auto Leos') that achieves a performance of 331 megahashes per second. The speaker hints at using a percentage calculator to further analyze this data, likely to determine efficiency or compare different setups. Specific details may include insights into optimal power usage, cost efficiency, or comparisons between alternative technologies.
• 04:00 - 05:00: Profitability Analysis This chapter provides an analysis on profitability. It begins by examining the required specifications, including a discussion on obtaining data from tech power sources. A specific data point highlighted is the 960 gigabytes per second. The chapter progresses by comparing this data point to another value, namely 448, and calls for a calculation to understand the relation between these two figures. Further details of the calculation or its implications are not provided in the transcript.
• 05:00 - 06:00: Conclusion and Viewer Engagement In this chapter, the focus is on optimizing the hash rate and power consumption of a particular graphics card model. The discussion starts with calculating 46% of 331 to determine a hash rate of 152. Emphasis is placed on the benefit of low power consumption, citing the graphics card's TDP of 180 Watts. The chapter aims to provide insights into achieving efficiency in hash rate calculations and energy usage, highlighting the favorable aspects of the graphics card's design for energy savings.

RTX 5060 Ti Hashrate Prediction, Is It Worth Mining On? Transcription

• 00:00 - 00:30 [Music] did get some specifications for the RTX 5060 TI confirmed with a 180 watt confirmed apparently there will be two variants a 16 gab and a 8 gbyte now the interesting part about this is we still get the same bus width and we don't get any total memory bandwidth performance boost in this apparently either at least
• 00:30 - 01:00 uh from what I can tell from what they're reporting right so what they had said is that both boards will have the gdr 7 clocked at 28 gbits per second and that it will have 128 bit bus for a total of 448 gabyt a second of bandwidth so if we did something like let me pull up my hash rate chart here real quick just so we can get the actual numbers for you guys so if we took a
• 01:00 - 01:30 look at um let's say the let's say the 80 on auto Leos which is getting that 331 megahash a second right and we pull up a percent calculator and we say um essentially
• 01:30 - 02:00 and then we need the uh 80 uh specs which I think we can pull up on tech power up so we have 960 gigabytes a second right so we say essentially what is the 448 compared to that 448 okay calculate that out that's going to be
• 02:00 - 02:30 46% so we say what is 46% of 331 and we calculate that out we'd be looking at an ergo hash rate of 152 now the good news is that we could get extremely low power consumption out of this particular card right so we have a TDP of 180 Watts if we do the uh TDP on the 59 90 let's look at this real
• 02:30 - 03:00 quick I'll pull that up for you guys where is it here clock speed board design 360 Watts so we can do 360 or we can do 180 is what of 360 calculate that out we know that we had 160 Watts on there so let's say 50% um I'm going to say that we'll be around around 80
• 03:00 - 03:30 Watts at the wall on the 5060 TI with the 150 Mega has a second on auto Leos so if we plug that into hash rate. let's go to our calculator and we'll find Ergo El go if I can find it there we go
• 03:30 - 04:00 154 was it at 80 Watts 10 cents a kilowatt hour calculate that baby out you'd be making exactly zero doar right now but 19 cents a day or 0224 urg per day uh in Revenue so that's where you're at with that that's my official prediction for the RTX 5060 TI let me know if you guys think that prediction is on point or not and why
• 04:00 - 04:30 and we'll go from there I think it's possible we get better power numbers like all the way down to like I think the best we're going to get is like 68 to 70 Watts that's kind of what I'm thinking maybe showing like 60 watts in the software somewhere around there I hope you enjoyed this clip from the crypto mining show if You' like to see more from this particular episode take a look up here don't forget to also o
• 04:30 - 05:00 subscribe to the channel and if you want to support me directly you can go to son ofate tech. locals.com and become a member thanks for watching and I will see you next Tuesday